Cable Tag

3D printable home-lab cable labels

Configuration
{ }
Drop settings .json here or click
Tags
Print Settings Template (optional)
3MF
Drop or click to import print settings from a .3mf file
Slicer not detected — choose:
Export

Tags are laid on the plate text-face-down for a smooth finish.

Style
Two-piece snap clamp; recessed text in the deck for a smooth multicolour show face — both halves carry text (the second is rotated 180° so they read together).
Rotates the second half's text 180° so both halves read the same way once mated. Turn off to keep both halves' text in the same build orientation.
Raised 0.5 mm rings (0.2 mm proud) around the channel hole that bite into the cable if the sleeve hole is a touch loose.
Text
Holds the tag length fixed (set below) and wraps the text onto stacked lines at each space — e.g. "SERVER 01" → "SERVER" / "01".
Aa
Drop font file here or click
Body
Chamfers the end faces where the cable channel exits (same size as the chamfer above). On the clamp: a notch to lever a tool in and pop it off the cable. On the wrap-over: a tapered funnel that eases the cable in and fades out at the web.
Snap Connector

A barbed snap post (base 1.3 → bulge 1.7 mm) into a trough, matched to the reference MatingConnector. Tune clearance to your printer for the snug fit — smaller is tighter (≈0.15 mm is reference).

Colors
#3a6ea5
#ffffff

Colours preview the model and name the filament slots — pick the real filaments in your slicer.